Nowadays, the LED lamp is the most common lamp in our daily life, it has profoundly affected our life. But do you know what material the LED tube is made of? Is it glass? custom plastic led tube factory introduces you to:
1. Introduction of LED tube
Custom plastic led pipe china is also commonly known as the LED light tube, LED fluorescent tube, LED fluorescent lamp, and its light source uses LED as the luminous body. The traditional fluorescent tube is also called a fluorescent lamp. There are filaments at both ends of the lamp. The lamp tube is filled with traces of argon and thin mercury vapor. The inner wall of the lamp tube is coated with fluorescent powder. The gas between the two filaments emits ultraviolet light when conducting electricity. Make the phosphor emit visible light. Due to the heavy metal pollutant "mercury", the environmental pollution caused by scrapped fluorescent tubes is very serious.
Custom Plastic Pipe China
Custom plastic pipe china uses light-emitting diodes as the light source, which has higher light efficiency, more energy saving, longer service life, and more environmental protection. Become the most ideal product to replace fluorescent tubes at this stage. The LED tube is the same in size and caliber as the traditional fluorescent lamp. There are T5 tube, T8 tube, T10 tube, and the length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m.
2. Ten advantages of LED tube
1. Environmental protection lamps
Traditional fluorescent tubes contain a large amount of mercury vapor. If broken, the mercury vapor will volatilize into the atmosphere, causing pollution. However, the LED lamp tube does not use mercury at all, and the LED products do not contain harmful substances such as lead. The outer shell can also be recycled and used, without damaging the environment. LED lamps are recognized as green lighting in the 21st century.
2. Less fever
Traditional lamps use tungsten light to generate a lot of heat and LED lamps to have a light efficiency of 140LM / W. The light conversion rate is high. The surface temperature of the product is below 60 ° C. No ultraviolet rays are generated, and no documents or clothing Fading phenomenon.
3. No noise
LED lamps do not produce noise, which is a good choice for the use of precision electronic instruments. Suitable for occasions such as libraries and offices.
4. Eye protection
The traditional fluorescent lamp uses alternating current, so it will produce 100-120 strobes per second. The LED lamp tube works with LED constant current, which directly converts alternating current to direct current, effectively reduces the LED light decay, starts quickly, without flickering, and protects the eyes.
5. No mosquito troubles
The LED lamp tube does not produce ultraviolet light, infrared light and other radiation, does not contain mercury and other harmful substances and generates less heat. Therefore, unlike traditional lamps, there are many mosquitoes around the lamp source. The room will become more clean and tidy.
6. Wide voltage range
The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and cannot be lit when the voltage drops. The LED lamps can be lit within a certain range of voltage (such as AC 85-265V)
7. Long power-saving life
The power consumption of LED tubes is less than one-third of that of traditional fluorescent lamps, and the service life is 10 times that of traditional fluorescent lamps. It is basically the same as the brightness of traditional fluorescent lamps. The normal service life is more than 30,000 hours, and power-saving is more than 70%. Use without replacement, reduce labor costs, more suitable for occasions where replacement is difficult.
8. Sturdy and reliable
The LED body itself uses epoxy resin instead of traditional glass, which is more sturdy and reliable. Even if it is hit on the floor, the LED will not be easily damaged, and it can be used with confidence.
9. Good versatility
The shape and size of the LED tube are the same as the traditional fluorescent lamp, which can replace the traditional lamp.
10. Rich colors
Make full use of the advantages of the rich colors of LEDs to make lamps of various luminous colors.